A wet dry aquarium filter system is a type of filtration system used to keep an aquarium clean and healthy. It combines biological, mechanical, and chemical filtration in one unit. The primary component of the wet dry filter is a sump tank filled with water from the aquarium. This water passes through a series of…
No, aquarium salt does not kill beneficial bacteria. Aquarium salt is a non-iodized form of sodium chloride and it contains no additional chemicals or additives that can harm the beneficial bacteria in an aquarium. The purpose of adding salt to an aquarium is to create a more natural environment for fish by increasing the salinity…
Tannins are organic compounds that can give your aquarium water an unpleasant yellow or brown tint. Removing tannins from aquarium water is a fairly simple process and can be done in three steps: 1) Firstly, increase the frequency of partial water changes to remove some of the tannin-rich water. 2) Secondly, use activated carbon filtration…
1. Start by removing the affected aquarium plants from the tank and giving them a thorough rinse in warm water to remove any dirt or debris. 2. Fill a bucket with lukewarm water and add 1 teaspoon of bleach per gallon of water, then soak the plants for 15 minutes. 3. Remove the plants from…
The Top Fin Dazzle Aquarium 5 Gallon Filter Replacement is a replacement filter for the Top Fin Dazzle Aquarium, which is designed to fit five-gallon tanks. It features an adjustable flow rate, a replaceable carbon cartridge, and a quiet operation. This replacement filter also comes with a foam pre-filter that helps to keep debris from…
Too much salt in an aquarium can cause a range of negative effects to the fish and other inhabitants. The main symptoms include: osmotic shock, which results in lethargy, swimming irregularly or not at all; gill damage due to excessive salinity; and physical deformities such as bloating or discoloration. Poor water quality caused by too…
The Tidal 55 Aquarium Filter is a powerful and reliable filter designed specifically for saltwater aquariums. It consists of a large, easy-to-clean canister with two separate compartments to hold mechanical and chemical filtration media. The filter uses a four-stage filtration process that includes an adjustable flow rate pump, dual stage mechanical/chemical media, and an activated…
Aquarium plants need to be fertilized in order for them to grow and thrive. Fertilizing aquarium plants can be done naturally by using natural materials such as fish waste, decomposing leaves, and mulm from the substrate. Fish waste is a great source of nutrients and can easily be collected by removing excess uneaten food or…
A saltwater aquarium should have a specific gravity of approximately 1.025 for marine fish and invertebrates to thrive in the environment. This translates to about 35 grams of salt per gallon, or 5 tablespoons of aquarium-grade sea salt mix per each US gallon (3.785 liters) of water. It is important to only use high-quality sea…