Aquarium owners realize that oxygen is needed by more than just the fish. There is also a necessity for the algae in the water to breathe!
An all-natural algae remover for your aquarium, Oxy Shell, is available.
It cleans your aquarium’s surface of green slime and brown pigments without damaging your fish or any other aquatic life.
How to use oxy shell for fish tank?
Oxy Shell is an excellent alternative for anybody who is worried about their health since it is nontoxic, odorless, and good for the environment.
There are no chemicals, solvents, or potentially harmful ingredients present.
Oxy Shell has been approved as a fish tank additive by the Environmental Protection Agency.
By removing algae from all surfaces of your tank, including the glass and gravel.
Without the use of harsh chemicals that might be hazardous to people and pets.
Oxy Shell is a safe alternative to traditional algae removal methods.
In order to clean the interior of your fish tank, Oxy Shell is a product that you may purchase.
It is made without any chemicals, making cleaning easier!
Because the Oxy Shell dissolves in water, you only need to add a little amount of it each time you use it.
It is essential that no other materials, like as stones or plants, be present in the tank while using this product, since they will all be dissolved by the product’s acidic nature.
When handling this product, be sure to use gloves since you don’t want any of it to go into your eyes or your mouth.
When to use oxy shell for fish tank?
Oxy shell is a fantastic product to use in a fish tank since it cleans the water and eliminates nasty smells from the environment.
As an added bonus, it aids in the removal of pollutants from the tank, which is particularly beneficial if you have an older filter that may not be as efficient as it previously was.
If your nitrate levels are more than 40 parts per million (ppm) or your ammonia levels are greater than 3 parts per million (ppm), it might be wise to use oxy shell.
Because oxy shell is so concentrated, you should only need to treat with it once every 2-4 weeks at the most.
Wait 24 hours after applying oxy shell before turning on your filter again.
This gives the chemicals enough time to spread throughout the water column and begin working their magic on the bacteria.
Side effects of oxy shell for fish tank
Oxy shell is a new product on the market that makes the promise of decomposing organic waste and converting it to less hazardous molecules.
This blog article will address some of the oxy shell for fish tank’s adverse effects, as well as the mechanics of how it works and any possible hazards related with its use.
Possible Adverse Reactions: Oxy Shell may promote excessive development of algae and other plant life in the immediate vicinity of an aquarium.
It presents a threat to aquatic life if there is an excessive amount of oxygen dissolved in the water or if there are insufficient food particles available to feed them.
Precautions while using oxy shell for aquariums
For many enthusiasts, the usage of oxy shell in aquariums is a popular option.
Increased oxygen levels, lower ammonia and nitrite levels, and healthier fish are all possible outcomes.
To ensure safety for your family members, you must take certain precautions. Some good-to-know tips for the beginner.
One rule is to never combine an existing tank with a new one that you plan to install.Water toxicity and excessive ammonia levels will ensue if this is done.
Before you use them, keep the following in mind:
-Remove waste as soon as possible to keep the tank clean.
-Install a filter system or another technique of filtering.
– After adding an oxy shell to the tank, keep all children and animals away from it since it may irritate the skin, eyes, and/or respiratory system.
Benefits of using oxy shell for fish tanks:
Improve water quality and reduce ammonia by adding OxyShell to fish tanks.
To keep your aquarium’s pH levels stable and avoid algae formation, use it as instructed.
New tanks and newly acquired fish may benefit from this method of keeping the environment safe.
You may safely use OxyShell’s active component, sodium percarbonate, in your aquarium since it breaks down into oxygen, water, and soda ash when dissolved in water.
Applying OxyShell on decorative plants might cause them to yellow from exposure to high quantities of carbon dioxide.
Always read the label before using on any sort of plant life.
At your local pet shop or on Amazon, you may get Oxy Shell and apply it once every two weeks while the filter is running.
But make sure you give this natural cure plenty of time or it may not work as well and may potentially do more damage than good.
Types of oxygenation that can be used with a fish tank:
Bubblers and pressured oxygenation are two alternative methods of oxygenation that may be used in fish tanks.
The process of bubbling happens when the water is stirred, and in order for this sort of oxygenation to be effective, bubbles must be formed on a consistent basis throughout time.
Pressurized aquariums are created by pumping air into the aquarium via a filter or diffuser, which is accomplished by the use of an air pump.
The sort of fish tank you should choose will depend on your personal choice as well as your financial constraints, but both are efficient methods of keeping fish alive.
How to clean your water, and what chemicals you should use?
Before you begin cleaning the water tank, make sure you have everything.
In addition, you’ll need some kind of siphon, a bucket or container to hold the filthy water, gravel cleanser (optional), a sponge, and a non-metal scrub brush.
Now that everything is in order, it’s time for you to get started! It is crucial to be patient when caring for fish.
The first and most critical step in cleaning your aquarium’s water is to drain the tank completely.
For this you may use a siphon tube or just remove each fish and let them swim about in a bucket until all of the standing water has evaporated.
After completing the previous phase, it is now time to move onto the next.
This procedure calls for the addition of specific chemicals to the tank in order to remove any contaminants that have accumulated over time.
Regardless of where you buy them, they are always clearly marked as being manufactured in the United States.
Importance of Cycling Your Aquarium
Taking care of your aquarium on a regular basis is critical to the well-being of your fish and plants.
Reestablishing a natural and biological equilibrium in an aquarium is known as “cycling.”
There will be no ammonia or nitrite buildup, which may be lethal to fish and coral if not addressed.
Dead plant materials, as well as uneaten food and garbage, contribute to the production of ammonia and nitrites in your aquarium.
Before you begin the process of cycling your tank, it’s crucial to identify what kind of fish you want to keep.
Before starting this procedure, think about whether or not you want invertebrates, such as corals, since they, too, require specific care when cycling.
It is important to cycle your tank before you introduce new fish.
Ammonia may be added in a “fishless” cycle manner until the concentration reaches 4 ppm (parts per million).
As a result of this, a complete load of fish will not be at risk of harmful poisons from the bacteria.
Regular water changes are still required as part of good care for any aquatic pets after the cycle has been established.
Friendly bacteria grow and reproduce as a result of the cycle process.
Aside from ammonia and nitrites, the bacteria are unable to sustain variations in temperatures or pH levels, so it’s crucial to keep an eye on these factors as well while cycling.
The three ways to cycle an aquarium
- Today, the most common method of cycling an aquarium is a fishless cycle, water changes, or a combination of the two.
- Fishless cycles may be performed by adding bacteria to new tanks or ammonia to an existing tank.
- In the aquarium, there are no fish. In both cases, you must wait 14 to 21 days before starting therapy.
- introducing any additional live species in this ecosystem would be hazardous.
- enough nitrifying bacteria are not present in order to efficiently break down pollutants
- broken down into its constituent parts.
- It is a good practice to change the water every once in a while.
- can’t be fixed by new poisons being added to it
- More plants or filtration media? One method of cycling an aquarium is not a good idea.
- influence over how long things take to stabilize
- bring one’s life back into harmony
Why it’s important to keep your filter running 24/7 while cycling an aquarium?
Aquariums provide an opportunity for individuals to get more connected to nature.
Fish may be a wonderful addition to your home or business, but if they are not given the proper care, they can die within a few days.
You can maintain your aquarium clean and healthy for years if you do frequent water changes and keep the filter running 24 hours a day.
It is critical not only to ensure that the water is changed on a regular basis (about 25-50 percent per week), but also that the filters are operational at all times.
The filters will eliminate dirt from the tank before it has a chance to harm any of the fish or plants in the aquarium.
Preventing the formation of this can help to stop algae!
Algae blooms cause the oxygen levels in your tank to plummet, which, among other things, may cause worry and anxiety.
Cleaning the stones and decorations on a regular basis is essential.
Summary
Oxy shell is a great product to use in your fish tanks. It helps oxygenate the water and keep it clean by removing harmful toxins for you.
All you have to do is maintain the tank itself, not worry about any chemicals or cleaning routines.
If this sounds like something you want to try out with your aquariums, we recommend contacting us today.